Support: WinTV-Aero-m

Latest applications and driver updates

Note: If you have run HCWCLEAR, you must reboot your PC and leave the WinTV-Aero-m installed. After a reboot you will see the Found New Hardware Wizard installation message, hit Cancel. then continue below.

WinTV v7 application and TV tuner driver download package

WinTV v7 installation package, version 3.9c for Windows 8, 7, Vista and XP

File name: wintv7_cd_3.9c.exe
File size: 151.4 MB
Date: 11/07/2014

This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v7 application and utilities.

Installation notes:

A valid WinTV application CD-ROM will be needed to install this WinTV v7 version. Any WinTV v6 or WinTV 7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to WinTV v7, you can purchase a new CD on the Hauppauge webstore for $9.95

If you have a WinTV v7.2 CD-ROM with Extend, then the latest version of WinTV Extend will also be installed.

To install the WinTV v7 application update

  • Download the WinTV v7 installation package to your PC. After downloading this file, the file is normally saved in the Download directory on your PC
  • Insert your original valid WinTV CD in your CD-ROM drive
  • Run Setup.exe from the Download directory on your PC

This will complete the driver and application installation for your WinTV.

Supported WinTV products:

This version of WinTV v7 is for digital TV, both QAM and ATSC, plus analog cable TV. It can be used with the following WinTV products:

  • USB-Live2
  • WinTV-Aero-m
  • WinTV-HVR-850
  • WinTV-HVR-955Q, WinTV-HVR-950Q and WinTV-HVR-950
  • WinTV-HVR-1150
  • WinTV-HVR-1265 and WinTV-HVR-1250
  • WinTV-HVR-1500
  • WinTV-HVR-1600
  • WinTV-HVR-1800/1850
  • WinTV-HVR-1955, WinTV-HVR-1975 and WinTV-HVR-1950
  • WinTV-HVR-2255 and WinTV-HVR-2250
  • Colossus
  • HD PVR (all models)
  • HD PVR 2 (all models)
  • WinTV-DCR-2650 digital CableCARD receiver

In addition, WinTV v7 can be used with the European equivalents of the above models (for example, the WinTV-HVR-2200).

Release notes for WinTV v7:
  • Fixed an error "You do not have access to make the required system configuration modifications..."
  • Increased Pause Buffer bar size
  • Fixed TitanTV tvpi file association bug
  • New NOVA-HD-USB 2 driver to fix issues in Turkey and other countries with low symbol rates
  • New HVR-1975 driver to fix issues with 6875 Symbol rate
  • Fixed no Extend tab showing on upgrade installation

To install the latest driver:

Leave your WinTV-Aero-m plugged into your PC. Follow the following steps:

  • Download the WinTV-Aero-m driver update: c6drv_29048
  • Unzip this file to a directory you will remember, such as WINTV. It will create a new folder. To install, open the folder.
  • Run HCWDRIVERINSTALL.EXE.
  • This will install the WinTV-Aero-m driver. At the completion of the driver install, you should see a message which says Drivers have been updated successfully.

Name: c6drv_29048.zip
Size:
291 KB
Updated: 2/17/2011


None at this time.

None at this time.

None at this time.

WinTV-Aero-m QuickInstall guide

Download WinTV v7 users manual

Prodinfo: get information on your Hauppauge TV tuner

downloadDownload Prodinfo

Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

HCWClear: remove the Hauppauge driver and applications from your PC

downloadDownload HCW Clear

HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the Wintv program.