The operation of WinTV under Windows requires two pieces: a Windows driver and a WinTV application. The driver is found under the section "Latest Windows driver" while the WinTV application is available below in "Latest WinTV Application" section. You cannot run the application without loading the driver.
You can find accessory applications such as the remote control or scheduler under the Accessories tab above.
Latest Windows driver
For WindowsXP, Windows98SE, WindowsMe and Windows2000
Note: if you have an 878 based WinTV PCI board, please go to our pages for 878 based WinTV's
Driver for 88X-based WinTV boards
Note: this driver unzips, removes an existing WinTV driver and installs the latest driver on one easy step.
- Download this file (wdm88x_2105_23074.exe) and save it to a directory you will remember (for example: C:\)
- Run wdm88x_2105_23074.exe This will unpack the driver and start the driver installation.
- Halfway through the installation you will be asked to Reboot. Do so to continue the driver installation.
- Download and install the WinTV application.
Updated: March 16, 2005
Latest WinTV Application
Note: the operation of WinTV under Windows requires two pieces: a WinTV driver (the WinTV driver is available above in "Driver" section) and a WinTV application. You cannot run the application without loading the driver.
To install, copy this file to a temporary directory on your local disk. Then run wintv2k_412_24054.exe, which will install the new WinTV2000 application.
For support of the new Hauppauge remote control and the Hauppauge IR RemoteBlaster, use the latest IR Remote Control and IRBlaster Setup program. (found in the Accessories section of this page).
Size: 2.5 Mb
Updated: Jan. 11, 2006
WinTV Radio application for use with WinTV version 6
- this application runs with WinTV version 6 on WinTV boards equipped with FM radio
- WinTV v7 has a built-in FM radio application
To install, download to a temporary directory and run RADIO32.EXE
New features include 30 presets and local/distance reception. Also, name radio stations by creating a preset and then clicking on the freq display and typing in the string you want.
Click here to see instructions on using the new WinTV Radio32 application.
Size: 340 KB
Updated: June 3, 2008
IR Remote control application
Remote control applet. After you run this applet, an icon will appear in your Windows device tray showing that the Hauppauge remote control is active.
Updated: April /2015
This version allows 'background recording' on dual tuner WinTV products.
This version also supports Hauppauges' Wing, for creating iPod and Sony PSP videos from your standard definition MPEG-2 recordings (note: Wing requires the purchase of a license. For more information, go to http://www.hauppauge.com/site/wing/).
Updated: February 23, 2005
None at this time.
WinTV Manual for 881 based WinTV boards
WinTV QuickInstall for 881 based WinTV boards
What operating systems can the WinTV PCI card be installed under?
The WinTV PCI boards will function on Windows95, Windows98, Windows ME, WindowsNT 4.0 (service pack 3 or higher), Windows 2000, and Windows XP systems.
3rd party Developers have also written WinTV-pci drivers for both LINUX, and the BeOS. These drivers, information, and their support may be found on their respective websites.
Connecting a SATELLITE / DSS / CABLE BOX to WinTV
There is no Audio from the WinTV
First, be sure that the supplied audio cable is connected from the WinTV card to the Sound Cards LINE-IN.
NOTE: On systems that do not have an actual "line in", substitute "Auxiliary"(AUX), or "Microphone"(Mic) for the configuration procedures below.
In the WinTV 2000 Application, click the AUD button for the audio configuration dialogue (or configure/audio in WinTV32), be sure that the MIXER-ID list shows "Line-in", and that the volume is up.
Also, in the sound card volume configuration (under PROGRAMS- ACCESSORIES-ENTERTAINMENT-VOLUME CONTROL), be sure that the LINE-IN section is not on MUTE (as it commonly is on default) and that the volume is up.
If all of this is done, and there is still no AUDIO from the WIN/TV card, try connecting your PC speakers(powered speakers only) or a set of headphones directly to the WIN/TV board. You should get audio (although low) this way. If you do- there would be a problem with the sound card configuration or a hardware problem with the LINE-IN. If you do not get audio directly from the WinTV card, it would unfortunately indicate a faulty audio circuit on the WinTV, and therefore would require the board to be replaced.
Causes for System Lockups
Black Screen in WinTV
If you experience a black screen, but hear audio when running the WinTV software, try setting the Primary application (start/programs/Hauppauge WinTV/Primary) to “DIB DRAW” mode, and re-open WinTV to correct the problem.
If the problem continues, updating the VGA drivers for the graphics chipset in the system is recommended.
"Data invalid" error when trying to install drivers
If you are receiving this error under WindowsXP, please refer to this document: Data invalid WinXP
If you are receiving this error under Windows2000, please refer to this document: Data invalid Win2000
Setting up channels for Broadcast TV and External inputs
To Add a Composite channel / External input in the Channel Configuration, click on...
I want to save my channel library when I reinstall the software
Enabling Closed Captioning using the WinTV2000 application
NOTE: Your VGA card MUST support OVERLAY in order to get the Closed Captioning information.
Make sure that the WinTV is running in Overlay mode before using the Closed Captions. To do this, shut the WinTV off. Then open the Primary program by going to Start - Programs - Hauppauge WinTV - Primary. In here make sure the "Allow Overlay" option has been selected. Then close the applet.
In the WinTV2000 application you can access the Closed Captioning through the CC button on the main TV window or in the Remote Applet that is part of the WinTV program. Click on the RC button on the bottom right-hand side of the WinTV window. This will open the Remote Applet and then you can click on the CC button for the Closed captioning.
The Audio is not recorded when I capture video
If you do not record the Audio when you are capturing Video Clips, you want to make sure that the sound card's Line In mixer is setup to Record audio. Sometimes they are set for Playback only. To Check this, click on Start - Accessories - Entertainment (or Multimedia), in the Windows Volume Control, go to Options then Properties. In here click on the Recording Bullet. Below you should see the Mixers that are set to record make sure that the Line In is checked and click on OK. Then make sure that it is not muted. Try to record some audio through the Line In jack using Windows' Sound Recorder. This program is found in the Multimedia group.
If you can record audio using the Sound Recorder, then you should be able to capture audio with the capture program.
Garbled video image when recording
“Failed to Create TV Window” error when attempting to run WinTV2000
Uninstalling WinTV Software
Prodinfo: get information on your Hauppauge TV tuner
Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe
HCWClear: remove the Hauppauge driver and applications from your PC
HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.